About us  |   Products  |  Service  |   Contact us  |  Sitemap www.h-lift.com
Products>>Materials Handling >> Hydraulic JacK


HYDRAULIC JACK

H-LIFT hydraulic jacks for repairs, maintenance and installation of heavy machines

▲ Compact and stable construction.
▲ Can be used in any position.
▲ Housing revolves 360 degrees.
▲ Lowering speed can be accurately adjusted.
▲ Protected against overloading.
▲ Pump lever is removable.
▲ According to CE and US standard USA ASME/ANSI B30.1.1986.

CAUTIONS!

▲ Do not exceed the maximum load capacity of the jack.
▲ Do not add additional load to a lifted load.
▲ Do not use in unstable or hazardous positions.
▲ Unit must be used on flat surfaces able to carry the load.
▲ The load must be stable during lifting.
▲ An unstable load may cause the jack or load to slip.
▲ Do not use jack if damaged, altered or in poor condition.
▲ Do not lift people or loads with people on them.
▲ Do not lift at the end of the toe. Fully engage the load with the toe.
TYPE HJ-05 HJ-10 HJ-25
RATED CAPACITY (kg) 5000 10000 25000
LIFTING RANGE OF TOE (mm) 25~230 30~260 58~273
LIFTING RANGE OF TOP (mm) 368~573 420~650 505~720
LOAD ON THE OPERATING HANDLE (N) ≤380 ≤400 ≤400
NET WEIGHT (kg) 25 35 102
PACKING SIZE (cm) 36.5x20x43 38x22.5x48.5 54x32x61.5

 

Products>>Materials Handling >> Hydraulic Jack
  About us  |  Products  |  Service  |   Contact us  |  Sitemap www.h-lift.com
 Copyright @ 2009 H-Lift Industries Co.,Ltd. All rights reserved.
8/F., No. 560 Jincheng Road, Xiaoshan, Hangzhou, 311202, China
Tel: +86-571-8263-6008, 8263-6018, 8263-6058, 8263-6068
Fax: +86-571-8263-6028 E-mail: info@h-lift.com